Omni-Seal Water Resistant Sealer represents an innovation for sealing and enhancing our premium architectural masonry units. It is a liquid membrane sealer of 100% acrylic polymer formulation creating a full-gloss, smooth finish to protect and enhance the appearance of the architectural block. Cosmetically, Omni-Seal actually enhances the beauty of the aggregate and richness of the color of the masonry.

This breathable resistance is impervious to liquids, yet is vapor/air permeable. It provides excellent protection from the elements, such as water, alkalis, acids, air borne pollutants and ultraviolet light, without loosing the clear gloss finish.

The air dry feature of this coating allows for quick handling (approximately 15 minutes). As an interior and/or exterior finish, it can be applied by spray, brush or roller. It attains the smooth finish at low film builds; 4-6 wet mils applied is recommended.

• Gallon Coverage: 150 - 200 Sq. Ft.(When applied using sprayer).
• Quick air drying: dry to the touch in 10 to 15 minutes.
• Water resistant, yet vapor and air permeable.
• Meets all state and federal VOC requirements.
• Full-gloss finish will not blush.
• Cleanable.
• Low film build application: 5 wet mils max.
• Applied by spray, brush or roller.

Sealed Pavers

Unsealed Pavers

Performance Testing of Omni-Seal
Omni-Seal spray applied at 4-6 mils to masonry units, allowed to dry,
then subjected to the following agents/chemicals: